Air conditioner motor supplier teaches you to diagnose faults.
      2023/01/31| View:338

    As a professional air conditioner motor supplier, today we teach you how to diagnose the fault of the air conditioner fan motor. The air conditioner fan motor is an important component in the operation of an air conditioner. It must be in good working order for the air conditioning unit to work properly. The air conditioner fan motor drives the AC fan, which means that it can blow hot air out of the house as well as cool air into the room through the ductwork.


    air conditioner motor supplier

    How do I diagnose a faulty AC fan motor?


    1. If your air conditioner is making strange noises, running loudly, rubbing, or making clanking sounds, this may indicate that the fan motor or some part of the fan is loose.


    2. If the fan motor periodically shuts off suddenly or repeatedly, this may indicate an electrical problem, but the situation can easily get worse over time. If this happens, the fan motor needs to be repaired or replaced immediately.


    3. If the fan does not turn at all, even if the motor is energized, it is possible that the air conditioning fan motor has burnt out. In this case, it really cannot be repaired and the AC fan motor needs to be replaced.


    4. The performance of the fan motor will gradually deteriorate. Eventually, the AC system will not be able to cool the house sufficiently. It may mean that you need to upgrade the AC unit to a more powerful model.


    What are the functions of an AC fan motor manufactured by air conditioner motor supplier?


    The AC fan motor plays a vital role in turning the fan to keep the air moving. It blows hot air out of the house as well as cool air into the room through the ductwork. Without an AC motor, the AC unit would not work, so it is vital to keep it in good condition or replace it when it wears out.


    air conditioner motor supplier

    Minimum energy efficiency standards for fan motors.


    Temperature range and altitude for fan motors?

    In general, our AC fan motors can operate in environments from -30°C to +50°C and at altitudes up to 1000 meters above sea level. If required, fan motors can be supplied for operation outside this range.


    1. Fan motor housing standards

    The minimum enclosure standard for fan motors is IP44 according to the corresponding standard. IP54 or even IP55 enclosures are available for fully weatherproof applications.


    2. Fan motor finish

    Standard finishes are enameled topcoats over a suitable primer to provide a good appearance and protection for general use. Aluminum housings with a lower temperature rise are also available.


    3. Fan motor bearings

    Unless otherwise specified, all our fan motors are fitted with ball bearings. The bearing housings of fan motors up to at least the D140 frame size are fully enclosed and sealed for life, and therefore require no maintenance. The bearings are pre-greased and will last for several years under normal conditions.


    4. Fan motor power supply

    Fan motors are normally wound for 110-115V/60Hz or 208-240V/50Hz single-phase fan motors, however, we can supply fan motor windings for all voltage and frequency variations.


    5. Fan motor insulation

    Always use class B insulation and class B temperature rise, allowing operation in environments up to +40°C. Fan motors with higher temperatures, such as class F, are available on request.


    6. Multi-speed AC fan motors

    Many applications only need to reach maximum design conditions in a relatively short period of time, which can lead to wasted energy and therefore high running costs. To overcome this problem, various combinations of fan motor speeds can be offered depending on the fan motor synchronization speed. With this approach, significant power savings can be achieved while producing much lower noise levels.


    7. Fan motor thermal protection

    Thermal protection in the form of thermistors is integrated into any of our fan motors. Thermistor overloads must be used in conjunction with these fan motors.


    8. High-temperature applications for fan motors

    When continuous operation at higher ambient temperatures is necessary, fan motors can be used with class H insulation windings. the maximum continuous ambient temperature for class H insulation is 80ºC. the maximum ambient temperature depends on the load applied to the fan motor and the temperature rise of the motor.


    Changzhou jiayi Electric Co., LTD. is an air conditioner motor supplier, the company's main products are window type, cabinet type, split type wall mounted home air conditioner fan motor, commercial air conditioner motor, etc. If you have any demand for this product, please contact us directly.